Clipping sound or audio distortion in Exported file
Audio files that are highly compressed (pushed to the limit of the recording envelope) may clip when exported. To eliminate this problem, we suggest that you reduce the volume slider to 95%. The volume slider affects the volume of the exported file so by reducing it to 95% you should eliminate this clipping sound. (in rare instance we have seen the need to reduce this to as low as 85%)
REMEMBER, if you are exporting multiple loops or a loop within an entire song, you will need to change the volume in each of these areas because loops are not affected by the global settings applied to non-loop areas and conversely settings applied to non-loop areas will not affect any loop areas.
Related Articles
Popping, Clipping, Distortion
Song Surgeon provides unparalleled audio quality after key and tempo change. However, when working with highly compressed files, it is possible that you may initially hear some distortion in the form of a popping, clicking or scratching sound. This ...
Clipping or distortion in Song Surgeon.
In the vast majority of cases when you change key or tempo in Song Surgeon you hear no distortion of any kind. However, in a few cases clipping may occur. When you open the file in Song Surgeon if the data in the center of the Song Surgeon windows ...
Audio Stream Capture on Mac - "stop and check for permission issues"
When using Audio Stream Capture on a Mac, you need to start playing the A/V file you WANT to capture within 10 seconds of the time that you start the Audio Stream capture recorder module working. if you do not, and there is no audio input for 10 ...
Audio Stream Capture on Mac OSx - AirPlay
We have some reports that when AirPlay is turned on Mac it interferes with the Audio MIDI setup. If you are experiencing a problem with Audio Stream Capture and you are running AirPlay, please turn it off. After that check the manual configuration as ...
Audio to low, or audio clipping on Export
The volume button on the software doubles as a volume controller on Export. I suspect you have the volume slider at about 50%, that is why the resulting volume is reduced by 50%. Please set the volume slider to 100% when you export unless you have a ...